爱游戏手游平台官网

  • 01 material selection
    According to the furniture production drawings, the cutting staff will open the materials, and then according to the shape of the furniture, from the color, texture, size, the different plates are reasonably classified. Then, the insects were killed and shaped by high temperature steam to prevent the insects from deforming in the future.
  • 02 drying treatment
    The moisture content of mahogany furniture wood is directly related to the adaptation of furniture to seasonal changes, so the wood needs to be repeatedly dried to reduce the final moisture content to 8% - 12%. Several decades after the first working procedure, the specification of the board is subdivided and sorted again, and then it is put into the microwave drying room for drying. It takes about a month to eliminate the residual stress in the drying process, and let the board fully regain moisture to make it qualitative, so that it can enter the woodworking process.
  • 03 woodworking
    After the wood is qualitative, in order to keep the material square and straight, the carpenter will select and inspect the wood. If there is deformation and distortion, it is necessary to use professional tools to press and correct the wood to make it regular and uniform. Then refer to the production drawings, combined with the color and texture of wood for matching selection, so that the material of each piece of furniture is consistent. If there is a difference between the carving process and the carving process, it will be determined according to the structure of the parts.
  • 04 carving decoration
    Traditional furniture carving technology can be divided into line carving, relief carving, Yin carving, openwork carving, round carving, double-sided carving and so on. In the carving process, the sculptor will draw patterns on the paper according to the overall shape and requirements of the furniture after getting the furniture parts to be carved. Then, the drawings will be pasted on the wood pieces. Then, they will be roughened, carved, trimmed, and polished. After completion, they will be handed back to the carpenter's master to assemble the parts to form the finished product. The time spent varies according to the complexity and simplicity of patterns and patterns.
  • 05 grinding
    Scrapers are often used for carving parts, which are scraped repeatedly according to the direction of wood grain and carving knife. Then, the furniture is polished several times with different types of sandpaper from coarse to fine. Each grinder must thoroughly polish the traces left on the previous track, and then use the most delicate sandpaper to polish the furniture surface to be incomparably smooth. Finally, clean water is used to clean the furniture lines Smooth and smooth feel. The grinding process depends on the size of furniture specifications and the complexity of carving, about 10 to 30 days.
  • 06 fine grinding
    Fine grinding of furniture can be said to strive for perfection, to use the most refined sandpaper repeatedly grinding, until the furniture surface smooth, comfortable feel. Formed semi-finished furniture, after scientific and professional, repeated and delicate scraping treatment, makes furniture sharp edges and corners, smooth lines, smooth and smooth, comfortable handle, flat surface without wave feeling, good visual smoothness and smooth texture. After this treatment, the wood texture is natural and gorgeous, and the furniture surface is more smooth and smooth, the color is warm and crystal. After reaching this requirement, it can be put into the warehouse after passing the inspection.

All rights reserved Yue ICP B No. 15013601 technical support: Mahogany furniture